If you currently live in an older house with a leaky roof, or if you are looking to install a new roof to prevent water damage, then beware of these factors before installing the new roof. The first thing you need to determine is whether or not your house is located in an area that receives heavy snowfall and ice. If so, you’ll need to pay attention to the weight-bearing capacity of your roof. You will also have to make sure that your house has sufficient attic ventilation for a new roof installation. Here are some important factors you should know and how to spot them!
How Your Roof Responds To Rain
If you notice that there is water pooling on your roof after a rainstorm, this means that your roof isn’t draining properly. If you live in an area with heavy rainfall, you’ll need to make sure that your roof can drain the water quickly enough to prevent it from pooling and causing leaks. If this happens, according to this site you need to repair the roof. Additionally, you should also check the gutters and downspouts to ensure that they are clear and free of debris. Make sure to also clear any leaves or sticks that may have fallen on your roof during the storm.
What Causes A Leaky Roof and Prevention Tips
Many things can cause a leaky roof, but the most common culprit is poor attic ventilation. If your attic isn’t properly ventilated, the heat and humidity can build up and cause the shingles to deteriorate. This can lead to leaks and water damage. Another common cause of leaks is missing or damaged shingles. If you notice any missing or damaged shingles, you’ll need to replace them as soon as possible to prevent further damage. The best way to prevent a leaky roof is to ensure that your attic is properly ventilated. You can do this by installing vents in the soffits and ridge of your roof. You should also make sure that no obstructions are blocking the flow of air through your attic.
Your Roof’s Ventilation
Another important factor to consider before installing a new roof is the ventilation of your attic. If your attic isn’t properly ventilated, the heat and moisture from the summer months can cause the shingles on your roof to break down prematurely. To avoid this, make sure that there is at least one square foot of net free vent area for every 300 square feet of attic floor space. You can also install a ridge vent or soffit vents to help with the airflow in your attic. Roof ventilation includes two types: intake and exhaust. Intake vents are usually located at the bottom of your roof, while exhaust vents are located at the top.
The Age Of Your Roof
If you’re not sure how old your roof is, you can check the date on the building permit. The average lifespan of a shingle roof is 20-30 years, but if your roof is more than 15 years old, it’s time to start thinking about replacing it. If your roof is nearing the end of its lifespan, there are a few things you can do to prolong its life, such as having it inspected and repaired every few years. You should also have your gutters cleaned regularly to prevent debris from accumulating on your roof and causing premature wear.
How Much Snow And Ice Does Your Roof Get?
If you live in an area with heavy snowfall, you need to pay attention to the weight-bearing capacity of your roof. The amount of snow and ice that your roof can support will depend on the type of roofing material you have. For example, asphalt shingles can only support up to 20 pounds per square foot, while metal roofs can support up to 60 pounds per square foot. If you’re not sure how much snow and ice your roof can support, you can check with your local building department or roofing contractor. If you have any concerns, it is always better to get a second opinion from another roofing contractor.
The Materials On Your Current Roof
If you’re considering a new roof, you need to take into account the materials that are currently on your roof. For example, if your roof has asphalt shingles, you can’t simply put metal roofing over top of it. You’ll need to remove the shingles first, which will add to the cost of the project. Similarly, if your roof has wood shingles, you’ll need to make sure that the new roofing material is compatible with the existing material. Otherwise, you could end up causing more damage than good. Additionally, you need to make sure that the new roofing material you choose is compatible with the rest of your home. For example, if you have a brick home, you wouldn’t want to install a metal roof, as it would look out of place.
The Pitch Of Your Roof
The pitch of your roof is the angle at which it slopes. The most common pitches are 4/12, 6/12, and 8/12. The pitch of your roof will affect the type of roofing material you can use, as well as the cost of the project. For example, shingles are typically only used on roofs with a pitch of 4/12 or less. If your roof has a higher pitch, you’ll need to use a different type of roofing material, such as metal or tile. The pitch of your roof will also affect the ease of installation. A higher-pitched roof is more difficult to work on and will require special equipment, which will add to the cost of the project.
So, before you install a new roof, you need to make sure that your existing roof is in good condition. If there are any damaged or missing shingles, you’ll need to have them replaced before you can install a new roof. Additionally, you should check for any rot or water damage. If your roof is in poor condition, it’s best to have it repaired or replaced before installing a new one. Make sure to consult with a professional no matter what you decide to do with your roof because a roofing contractor will know best.
Photo via Unsplash
How To Create An Outstanding Outdoor Space: 6 Creative Ideas Next Post: